DC 저항측정기

ADEX社 AX-1644B 디지털 초고저항 검사기( High Resistance Meter ( 5.00kΩ ~ 1500.0GΩ)) 레인지 저항값을 고정밀, 고안정성, 고속으로 측정

ADEX계측기 한국대리점 , 유통 판매, 수리지원 2017. 1. 29. 13:29

 

ADEX社 저항계측기, 2차전지 밧데리 IR/OCV체커, 콘덴서 MLCC용량체커

수입, 유통 판매, 수리지원하는 해성시스템입니다

ADEX社 계측기 제품 구입문의 및 수리문의 / 계측기대여 문의는

☞ 해성시스템 ( Hae Sung Systems, Inc.) http://naver.me/xbDsr3M8

☎ 제품 상담 02) 2233-8949  ☎ 010) 2948-6944

☎ 수리 문의 02) 2233-4989    Fax :02-711-6944

 

 

 

AX-1644B 디지털 초고저항 검사기( High Resistance Meter ( 5.00kΩ ~ 1500.0GΩ)) 레인지  저항값을

고정밀, 고안정성, 고속으로 디지털 측정하여 내장된 디지털 콤퍼레이터에 따라 LO / GO / HI 판정을 실시 판정합니다.

 

 

ADEX AX-1644B 디지털 초고 저항 (ultra-high-resistance, 超高 抵抗 )

 초고 저항 체커범위 : 5킬로옴(KΩ)~300기가옴(GΩ)저항체커 ( 킬로옴 - 메가옴 - 기기옴)

칩저항, 멜프저항, 리드 타입 초고저항 선별기, 테이핑, 트리밍기에 최적

코팅 콘베이어 저항 자동화기기 장착용 SHIFT SOLENOID POWER( DC12V) 및 양품카운터 추가 장착

**자동화기기에 장착되어 시료의 고속측정 및 비교기( comparator )가

내장되어있어 시료의 비교판정 결과를 하한치( LO )/ GO / 상한치 (HI)로

LED 및 부저 ( buzzer )로 출력합니다

 

● 트리밍 모드가 가능합니다.
● 노이즈에 오차가 적은 고속 적분 방식 [레인지마다 적분 시간 설정 가능]
● 기준 저항 값 4 자리 디지털 설정에 의해 퍼센트 측정 [± 50.00 %] 
● 디지털 콤퍼레이터 결과는 가능한 오픈 콜렉터 출력, LED표시 및 부저음.
● RS-232C 인터페이스가 내장
● 측정 대상물에 따라 측정 전압 H / L 전환 가능 

 

 

 

■SPECIFICATIONS■
Measuring range and Accuracy (at23℃±5℃)
〔HV-deviation value measurement〕
Range Measuring Range Measuring Voltage Measuring Accuracy
100kΩ 5.00kΩ~150.00kΩ 15V ±0.03%±1digit
1MΩ 50.0kΩ~1500.0kΩ 15V
10MΩ 0.500MΩ~15.000MΩ 15V
100MΩ 5.00MΩ~150.00MΩ 100V ±0.03%±1digit
1GΩ 50.0MΩ~1500.0MΩ 100V
10GΩ 0.500GΩ~15.000GΩ 100V ±0.2%±1digit
100GΩ 5.00GΩ~150.00GΩ 200V ±0.5%±2digit
200GΩ
(1000GΩ)
50.00GΩ~300.00GΩ
(300.01GΩ~1500.0GΩ)
200V ±1%±4digit
*1
〔HV-absolute value measurement〕
Range Measuring Range Measuring Voltage Measuring Accuracy
100kΩ 5.00kΩ~150.00kΩ 15V ±0.1% of rdg ±1digit
1MΩ 50.0kΩ~1500.0kΩ 15V
10MΩ 0.500MΩ~15.000MΩ 15V
100MΩ 5.00MΩ~150.00MΩ 100V ±0.2% of rdg ±1digit
1GΩ 50.0MΩ~1500.0MΩ 100V
10GΩ 0.500GΩ~15.000GΩ 100V ±0.5% of rdg ±1digit
100GΩ 5.00GΩ~150.00GΩ 200V ±0.8% of rdg ±2digit
200GΩ
(1000GΩ)
50.00GΩ~300.00GΩ
(300.01GΩ~1500.0GΩ)
200V ±1.5% of rdg ±4digit
*1
〔LV-deviation value measurement〕
Range Measuring Range Measuring Voltage Measuring Accuracy
100kΩ 5.00kΩ~150.00kΩ 15V ±0.03%±1digit
1MΩ 50.0kΩ~1500.0kΩ
10MΩ 0.500MΩ~15.000MΩ
100MΩ 5.00MΩ~150.00MΩ ±0.3%±1digit
1GΩ 50.0MΩ~1500.0MΩ
10GΩ 0.500GΩ~15.000GΩ ±1.2%±2digit
100GΩ 5.00GΩ~150.00GΩ ±1.5%±2digit
200GΩ
(1000GΩ)
not able to use
〔LV-absolute value measurement〕
Range Measuring Range Measuring Voltage Measuring Accuracy
100kΩ 5.00kΩ~150.00kΩ 15V ±0.1% of rdg ±1digit
1MΩ 50.0kΩ~1500.0kΩ
10MΩ 0.500MΩ~15.000MΩ
100MΩ 5.00MΩ~150.00MΩ ±1.2% of rdg ±1digit
1GΩ 50.0MΩ~1500.0MΩ
10GΩ 0.500GΩ~15.000GΩ ±1.5% of rdg ±1digit
100GΩ 5.00GΩ~150.00GΩ ±2.0% of rdg ±2digit
200GΩ
(1000GΩ)
not able to use
*Range more than 10GΩ is measuring accuracy when appropriate to set measuring time etc.  *1 out of accuracy guarantee 
*The above accuracy is the value of the condition that was shielded completely.
 
Indication range ±50.00%
Measuring method 2 terminal measurement
Measuring time
(Measurement start signal be given after stable condition,
after measured thing connection.)
Integral Fast: 1msec~29msec(setting possible with 1msec step)
  Slow: 50Hz:20.0msec×(1~9)cycle
(setting possible with 1 cycle step) max.180msec
60Hz:16.7msec×(1~9)cycle
(setting possible with 1 cycle step) max.150.3msec
  Free run: about 33 time/sec~about 4 time/sec
Measuring delay time 0 msec~99msec setting possible every range
Comparator Upper, Lower : ±0.00%~±50.00% LO,GO,HI judgment indication + outpu
Control signal (DC12V photo isolation power inclusion)
Outside hold input : 0-12V signal and open short
Outside start input : 0-12V signal and open short(Logic switching possibility)
Judgment result output : Open correct output LO, GO, HI
Warm up time More than 30 minutes
Others Zero, Full scale calivration function by panel face operation
RS-232C interface are built-in as standard equipment.
Power supply AC100V-240V, 50/60Hz
Outer dimension 333(W)×99(H)×300(D)mm
(excluding protruding parts such as rubber legs, etc.)
Weight about 3.2kg
  
■OPTION■
GP-IB Interface/Centronics Interface
*Note:Only one kind of interface can be provided with the checker.
/Connecting cable to printer

 

 

 

ADEX계측기 한국대리점 (ADEX 계측기 수입, 유통 판매, 수리지원) 해성시스템입니다

ADEX계측기 제품구입문의 및 수리문의 / 계측기대여 문의 및

이 제품 이외에도 관심있으신 제품이 있다면 언제든지 편하게 문의해주시길 바랍니다.

 해성시스템 ( Hae Sung Systems, Inc.)

서울특별시 금천구 가산동 60-46 더리즌밸리 지식산업센터 제 3층 317호

☎ 제품 상담 02) 2233-8949 ☎ 010) 2948-6944

☎ 수리 문의 02) 2233-4989 Fax :02-711-6944

ADEX Brand Tester는 자동화기기에 장착되어 시료의 고속측정 및 비교기 ( comparator )가 내장되어있어 시료의 비교판정 결과를 설정된 하한값( LO )불량/ GO 양품 / 상한값 (HI)불량을 LED 및 부저 ( buzzer )로 설정값의 양/부판정이 가능합니다 http://naver.me/xbDsr3M8

2차전지, 밧데리, 전지 내부저항/전압 (IR/OCV)배터리테스터,

밀리옴(mΩ)미터, 써미스터(저항) 비교 체커기, 하이테크 핀셋 ( siva-touch ) 전문

■2차전지, 밧데리, 전지등의 내부저항/전압 (IR/OCV)체커기

■션트저항기(shunt-resistor) 등의 초저저항 (마이크로/미크론 옴(uΩ) , 밀리옴(mΩ) 체커기

■멀티리드저항 및 네트워크 저항기( 2채널, 4채널, 8채널, 10채널, 20채널 ) 체커기

■써미스터(Thermistor ,저항 온도센서) ( 1채널 , 2채널 ) 비교 체커기

■2채널 LED 체커기. 디지털 용량 체커기

■Relay Switch 접점 저항체커기

■옴 미터, 메가옴저항 (MΩ), 기가옴 저항체커기(GΩ)

■낮은 임피던스 콘덴서의 ESR / Z 체커 , 콘덴서의 손실전류( leak current )체커

■하이테크 핀셋 ( siva-touch )

■Electrial Safety Tester, 내전압시험기, 절연저항측정기

■AC 전원공급기, DC 전원공급기 전문